FKuR showcasing heat-resistant PLA compounds at Fakuma 2018

Improved flowability and heat resistance
Bio-Flex S 7514 is a biodegradable compound based on polylactic acid (PLA), which has been optimized by FKuR for particularly comfortable and efficient processing. Thanks to its good flowability (MFR = 27 g/10 min), it is also suitable for use in multi-cavity molds and the production of parts with longer flow paths. The high heat resistance (Vicat A = 110 ° C), which is achieved without hot tool, allows for shorter cycle times. Typical examples of use are catering applications such as cutlery. Bio-Flex S 7514 has a bio-based content of 75% and is available in both natural and white. Other colors can be achieved by using a multiplicity of masterbatches.

Bio-based TPE and PP grades
The variety of bioplastics from FKuR also includes bio-based thermoplastic elastomers (TPE) as well as compounds based on polypropylene (PP).
Terraprene, the bio-based TPE compounds for extrusion and injection molding, have a bio-based content of 40% to 90%. They offer the same mechanical properties as their fossil fuel based counterparts and can be processed on existing production equipment and tools. It is also possible to produce complex components using 2K injection molding.
Terralene PP is a PP compound with a bio-based carbon content of approximately 35% (ASTM D 6866). In injection molding and in profile extrusion, it is a true drop-in solution because its performance and processability are comparable to those of conventional PP grades.

360 degree service
As a full-range supplier with a broad product portfolio, FKuR also advises on the selection of the most suitable bioplastics for specific requirements and offers extensive technical support, from the project implementation phase through to advice on marketing, all from a bioplastics perspective.



http://www.fkur.com and http://www.fkur-polymers.com