Online Archive
Find all previously published issues of bioplastics MAGAZINE in the Online Archive.
Browse any issue by clicking on one of the cover images below.
To search for a certain term, use the general search function in the menu above.
Archive / Search
Articles
- Issue 06 | 2022
Amorphous PHA meets PLA
CJ Biomaterials and NatureWorks will develop innovative sustainable materials solutions - Issue 06 | 2022
New glass fibre reinforced biopolymer compounds
Something not deemed possible has become a reality: fully biobased and biodegradable glass-fibre-reinforced compounds. Arctic Biomaterials (ABM) from Tampere, Finland, are delighted to announce the ... - Issue 05 | 2022
Performance products with high biocontent polyurethanes
Found in mattress foam and floor coatings, in textile adhesives and electronics, in membranes and construction materials, and in hundreds of thousands of other products, polyurethanes make a vital ... - Issue 05 | 2022
Single-use packaging, lids, and tableware...made from wheat bran
Pastas Doria develops a biocomposite using its own waste in conjunction with the ITENE research centre - Issue 04 | 2022
10 Years ago Published in bioplastics MAGAZINE
In July 2022, Peter Mangnus, Director & Supply Chain Avantium says: - Issue 04 | 2022
Next generation PHA
Launching the next generation industrial biotechnology (NGIB) and PhaBuilder - Issue 04 | 2022
Thermoformable PLA films
Röhm (Darmstadt, Germany), the provider of EUROPLEX®-brand special films, is now also developing plastic films using renewable raw materials. The new product is being developed under the provisional ... - Issue 03 | 2022
Hemp-based composite for wind turbine blades
Hemp is the second-fastest-growing plant on earth. With over 40 % of Canada’s hemp production happening in Alberta, it’s a well-known and valuable cash crop to prairie farmers – and now even waste ... - Issue 03 | 2022
New amorphous PHA product line
Advanced amorphous PHA technology will provide plastics manufacturers and consumer products companies with marine, soil, and home biodegradable options - Issue 03 | 2022
Current and future raw materials for renewable polymers
When it comes to plastics production, we are still crude oil junkies. The European Commission projects that by 2050, some 20 % of the global crude oil production could be used to produce plastics, up ... - Issue 02 | 2022
Plastics as CO2 sinks
Building a carbon-negative plastics industry with low-CO2 compounds and masterbatches - Issue 02 | 2022
There are no silver bullets but this one has a pretty shine
Since I joined bioplastics MAGAZINE in a bigger capacity about two years ago I came across one material that just sounded too good to be true – the UBQ™ material. The premise of taking mixed ... - Issue 02 | 2022
When Zero-Waste meets 3D printing
GREENFILL3D – a Polish start-up (located in Łódź) operating on the edge of ecological, biodegradable materials, and 3D printing, announces the premiere of its unique filament based on wheat bran – ... - Issue 01 | 2022
10 Years ago Published in bioplastics MAGAZINE
In January 2022, Fred Eickmeyer, Managing director and plant breeder Eskusa, Parkstetten Germany says: - Issue 01 | 2022
New 3D printing powder for food industry
FABULOUS, an expert company in polymeric 3D printing materials, brings innovation to a market now focused on production. - Issue 01 | 2022
Sustainable materials in high-end luxury car
The VISION EQXX is the result of a mission Mercedes-Benz (Stuttgart, Germany) set themselves to break through technological barriers across the board and to lift energy efficiency to new heights. It ... - Issue 01 | 2022
Lightweight biobased cellulose reinforcement for automotive applications
The automotive industry continuously strives to improve the driving range of cars. Whether being per litre of petrol for a combustion engine or in kilowatt-hour (kWh) for electrically powered ... - Issue 01 | 2022
Bio-PA composites
Renewable 1,5 pentanediamine based polyamide composites for automotive applications - Issue 06 | 2021
Fill the gap, not the landfill
Governments and institutions have been scrambling to rectify the global environmental disaster caused by the accumulation of plastic waste. This plastic waste comes in macroscopic forms such as ... - Issue 06 | 2021
Custom-made PHA formulations
PHAradox makes the next step to custom PHA based development - Issue 03 | 2021
Microplastic: solving the problem without harming our planet
Acoustic and thermal characterization of a novel sustainable material incorporating recycled microplastic waste - Issue 03 | 2021
Smart wood foam
Edible shock- and heat-resistant wood foam could replace plastic packaging - Issue 03 | 2021
PLA for large format 3D printing
NatureWorks (Minnetonka, MN, USA) continues to grow its portfolio of Ingeo™️ biopolymers specially designed for additive manufacturing with the introduction of Ingeo 3D700 for use in large-format 3D ... - Issue 02 | 2021
Speeding up time to market…
For biobased products using fast and efficient high throughput experimentation - Issue 02 | 2021
New barrier film structure for compostable food packaging
SP Group (Singapore) and Nurel Biopolymers (Zaragoza, Spain) present a new multilayer film structure, with high oxygen barrier, sealing, and transparency properties whose main advantage is the ...